HP GbE2c HP GbE2c Ethernet Blade Switch for c-Class BladeSystem Browser-based - Page 120

Table 94 Switch RADIUS Configuration controls Control Enable/Disable Radius Backdoor for telnet Enable/Disable Radius Secure Backdoor for telnet Radius Secret Secondary Radius Server Secret Description Enables or disables the RADIUS backdoor for telnet. Telnet also applies to SSH/SCP/HTTP/HTTPS connections. Enables or disables the RADIUS back door using secure password for telnet/SSH/ HTTP/HTTPS. Defines the shared secret (up to 32 characters) between the switch and the RADIUS server(s). Defines the secondary shared secret (up to 32 characters) between the switch and the Radius server(s). IMPORTANT: If RADIUS is enabled, you must login using RADIUS authentication when connecting via the console or Telnet/SSH/HTTP/HTTPS. Backdoor for console is always enabled, so you can connect using noradius and the administrator password even if the backdoor (telnet) or secure backdoor (secbd) are disabled. If Telnet backdoor is enabled (telnet ena), type in noradius as a backdoor to bypass RADIUS checking, and use the administrator password to log into the switch. The switch allows this even if RADIUS servers are available. If secure backdoor is enabled (secbd ena), type in noradius as a backdoor to bypass RADIUS checking, and use the administrator password to log into the switch. The switch allows this only if RADIUS servers are not available. Configuring the switch 120