HP GbE2c HP GbE2c Ethernet Blade Switch for c-Class BladeSystem Browser-based - Page 123
NTP Configuration, NTP Configuration controls
UPC - 808736802215
View all HP GbE2c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
NTP Configuration To display the following form, select System > NTP. This form enables you to synchronize the switch clock to a Network Time Protocol (NTP) server. By default, this option is disabled. The following table describes NTP Configuration controls: Table 96 NTP Configuration controls Control Description NTP Server IP Address Configures the IP address of the primary NTP server to which you want to synchronize the switch clock. Secondary NTP Server IP Address Configures the IP address of the secondary NTP server to which you want to synchronize the switch clock. Resync Interval (1-44640) Specifies the interval, that is, how often, in minutes (1-44640), to re-synchronize the switch clock with the NTP server. NTP Timezone Offset from GMT(-12:00...+12:00) Configures the NTP time zone offset, in hours and minutes, of the switch you are synchronizing from Greenwich Mean Time (GMT). Enable/Disable Daylight Savings Time Disables or enables daylight savings time in the system clock. When enabled, the switch will add an extra hour to the system clock so that it is consistent with the local clock. By default, this option is disabled. Enable/Disable NTP Service Enables or disables the NTP synchronization service. Configuring the switch 123