HP GbE2c HP GbE2c Ethernet Blade Switch for c-Class BladeSystem Browser-based - Page 32

Table 15 Switch Spanning Tree Groups Information controls Control Bridge Max Age Bridge Forward Delay Bridge Aging Time Description Specifies, in seconds, the maximum time the bridge waits without receiving a configuration bridge protocol data unit before it reconfigures the STP network. If the bridge is not the root bridge, it uses the MaxAge value of the root bridge. This command does not apply to MSTP. Specifies, in seconds, the amount of time that a bridge port has to wait before it changes from learning state to forwarding state. If the bridge is not the root bridge, it uses the Forward Delay value of the root bridge. This command does not apply to MSTP. Specifies, in seconds, the amount of time the bridge waits without receiving a packet from a station before removing the station from the Forwarding Database. Select a Spanning Tree Group number to display detailed information. Switch Spanning Tree Group Information To display the following form, go to the Switch Spanning Tree Groups Information form. Select a Spanning Tree Group number. Dashboard 32