HP GbE2c HP GbE2c Ethernet Blade Switch for c-Class BladeSystem Browser-based - Page 34
Switch Trunk Groups Dashboard, Switch Spanning Tree Port Information controls
UPC - 808736802215
View all HP GbE2c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Table 17 Switch Spanning Tree Port Information controls Control Designated Bridge Designated Port Description Shows information about the bridge connected to each port, if applicable. Information includes the priority (hex) and MAC address of the Designated Bridge. Displays the port ID of the port on the Designated Bridge to which this port is connected. This information includes the port priority (hex) and the port number (hex). Switch Trunk Groups Dashboard To display the following form, select Layer 2 > Trunk Groups. When trunk groups are configured, you can view the state of each port in the various trunk groups. NOTE: If Spanning Tree Protocol on any port in the trunk group is set to forwarding, the remaining ports in the trunk group will also be set to forwarding. The following table describes the Switch Trunk Groups Dashboard controls: Table 18 Switch Trunk Groups Dashboard controls Control Description Status Trunk Group Switch Port STG For each port in the Trunk Group, shows whether the port is down (red), up and forwarding (green) or in blocking state. Displays the numeric identifier of the Trunk Group. Displays the port number of each port that is a member of the Trunk Group. Displays the Spanning Tree Group to which this trunk belongs. Dashboard 34