HP GbE2c HP GbE2c Ethernet Blade Switch for c-Class BladeSystem Browser-based - Page 134

The following table describes the Switch Port ACL Configuration controls: Table 102 Switch Port ACL Configuration controls Control Description ACLs Available ACLs Selected ACL Groups Available ACL Groups Selected Lists the ACLs that you can add to the port. Lists the ACLs associated with the port. Select an ACL number in the ACLs Available list, and click Add to add the ACL to the port. Select an ACL number in the ACLs Selected list, and click Remove to remove the ACL from the port. Lists the ACL Groups that you can add to the port. Lists the ACL Groups associated with the port. Select an ACL Group number in the ACL Groups Available list, and click Add to add the ACL Group to the port. Select an ACL Group number in the ACL Groups Selected list, and click Remove to remove the ACL Group from the port. Port-Based Port Mirroring Configuration To display the following form, select Port-Based Port Mirroring (click the underlined text, not the folder). This form is used to configure, enable, and disable the Monitoring Port. When enabled, network packets being sent and/or received on a target port are duplicated and sent to a monitor port. By attaching a network analyzer to the monitor port, you can collect detailed information about your network performance and usage. The following table describes the Port-Based Port Mirroring Configuration controls: Table 103 Port-Based Port Mirroring Configuration controls Control Description Enable Port-Based Port Mirroring? Monitoring Port Mirrored Ports Enables or disables port mirroring on the switch. Port mirroring is disabled by default. Selects a port number to configure the port as a monitoring port. Displays the port(s) currently mirrored for each monitoring port. Configuring the switch 134