HP GbE2c HP GbE2c Ethernet Blade Switch for c-Class BladeSystem Browser-based - Page 135

Monitoring Port Configuration To display the following form, go to the Port-Based Port Mirroring Configuration form. Select a Monitoring Port number. This form lists all mirrored ports for the selected port number. Click Add Mirrored Port to select a port to be monitored by this port. Click Delete Monitor Port to remove all mirrored ports from this port's monitoring configuration. Port Mirroring Configuration for Port To display the following form, go to the Monitoring Port x Configuration form. Select a Mirrored Port number, or click Add Mirrored Port. The following table describes the Port Mirroring Configuration for Port controls: Table 104 Port Mirroring Configuration for Port controls Control Mirrored Port Port Mirror Direction Description Adds the port to be mirrored. Specifies the direction of the traffic: in or out or both. It is necessary to specify the direction because: • If the source port of the frame matches the mirrored port and the mirrored direction is ingress or both (ingress and egress), the frame is sent to the mirrored port. • If the destination port of the frame matches the mirrored port and the mirrored direction is egress or both, the frame is sent to the monitoring port. Configuring the switch 135