HP Jetdirect 200m HP Jetdirect 200m Print Server (English) User Guide - Page 101
I/O card not ready, network cable, If you made any changes
View all HP Jetdirect 200m manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
I/O card not ready Check the following items to see whether you can correct the "I/O Card Not Ready" situation. (If you have already performed these steps earlier in the troubleshooting process, you can skip them and go directly to answering the question at the end of the steps.) 1. Make sure that the network cable is connected securely to the print server. network cable 2. Check that the network cable is plugged securely into the hub/switch/router, and that the connection is set to the correct network speed. 3. Check that the LINK light is ON for the port on the hub/switch/router to which the print server is connected. 4. Your network cable may be faulty. Try a different cable. 5. If the light still does not come on, try a different port on the hub/switch/router. If you made any changes, please print another configuration page. Does the page show I/O Card Ready now?