HP Kayak XU 03xx HP Kayak XU Series 03xx, User's Guide - Page 144
Managing an Existing Array
View all HP Kayak XU 03xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
NOTE 4 Technical Information Using the ArrayConfig Program Managing an Existing Array You can manage an existing array in the following ways: • Making a bootable array • Displaying array information • Deleting an array • Initializing an array • Adding or deleting a spare disks Making the Array Bootable Follow these steps if you want your computer to boot from the newly created array or if you want to change the boot order of existing arrays: 1 Select Display Boot Order from the Main Menu. The Boot Order for Singles and Arrays window appears. 2 If the newly created array is listed as Unit 0 at the top of the list, no changes are necessary; if it has some other unit number, highlight the array name and press to select it. 3 Use the arrow keys to move the selected array to the top of the list. Then press to deselect it. 4 When you are finished, press to return to the Main Menu. You cannot use this procedure to change the boot order of a non-striped SCSI disk drive (see the "Resolving Problems" on page 134 for notes on booting from the Narrow SCSI BIOS). If you want to do this, create a one-drive RAID 0 "array" from the disk. Displaying Array Information Follow these steps to display information about existing arrays defined in your computer: 1 Select Disk Array Operations from the Custom Setup Main Menu. 2 Select Display Arrays from the Disk Array Operations menu. 128 English