HP Kayak XU 03xx HP Kayak XU Series 03xx, User's Guide - Page 24
Connecting the Power Cords
View all HP Kayak XU 03xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
1 Setting Up and Using Your PC Workstation Connecting the Power Cords Connecting the Power Cords 1 Remove any warning labels that may be covering the computer's power connector on the rear of the computer. 2 Connect the power cords to the display and the computer. (The connectors are shaped to go in one way only.) PC Workstation Power Connector WARNING Grounded Outlet Monitor Power Connector 3 Connect the display's power cord and the computer's power cord to grounded outlets. For your safety, always connect the equipment to a grounded wall outlet. Always use a power cord with a properly grounded plug, such as the one provided with this equipment, or one in compliance with your national regulations. This PC Workstation is disconnected from the power by removing the power cord from the power outlet. This means the PC Workstation must be located close to a power outlet that is easily accessible. 8 English