HP Kayak XU 03xx HP Kayak XU Series 03xx, User's Guide - Page 20
Connecting to a Network
View all HP Kayak XU 03xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
1 Setting Up and Using Your PC Workstation Connecting to a Network Connecting to a Network Your PC Workstation has a 10BT/100TX LAN interface adapter. The LAN adapter supports both 10 Mbit/s and 100 Mbit/s operations and automatically detects which network type is being used. 1 Connect the RJ-45 plug on your network cable to the LAN connector on the LAN Adapter. Push the plug into the connector until the plug clicks into place. The board shown here is a combined SCSI/LAN board. 2 Attach the other end of the LAN cable to a hub (or into a wall socket that is connected to a hub). Let your Network Administrator know that you are connecting your PC Workstation to the network. For further instructions on configuring your network connection, refer to "Configuring Your Network Connection" on page 103. Refer also to the online Network Administrator's Guide (preloaded onto your PC Workstation) for further instructions on setting up your PC Workstation for a LAN connection. 4 English