HP Kayak XU 03xx HP Kayak XU Series 03xx, User's Guide - Page 58
Connect the power cable and the data cable to the rear of the drive.
View all HP Kayak XU 03xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
2 How to Install Accessories Inside Your PC Workstation Installing Mass Storage Devices 8 Locate the appropriate data cable for the hard disk drive. Wide SCSI devices should be connected to a free SCSI connector on the SCSI cable (you can add up to five SCSI devices). IDE drives should be connected to a free IDE connector on the IDE cable (you can add up to two IDE devices). Up to 13 external SCSI devices can be connected via the external SCSI connector. Narrow SCSI devices should be connected to a free SCSI connector on the SCSI cable (you can add up to two SCSI devices). 9 Connect the power cable and the data cable to the rear of the drive. (The connectors are shaped to go in one way only.) Data Cable Power Cable 10 Install any other accessories before completing the installation. 11 Turn to page 46 to complete the installation. 42 English