HP Kayak XU 03xx HP Kayak XU Series 03xx, User's Guide - Page 59
Installing a Hard Disk Drive in a Front-Access Shelf
View all HP Kayak XU 03xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
NOTE 2 How to Install Accessories Inside Your PC Workstation Installing Mass Storage Devices Installing a Hard Disk Drive in a Front-Access Shelf To ensure your hard disk drive is properly located and cooled, you should only install drives that are up to one inch (1") in height and of a speed equal to or less than 7200 rpm in this shelf. 1 Disconnect the computer's power cord and any telecommunications cable. 2 Remove the computer's cover (see page 25). 3 Remove the fan connection to the system board (see the illustration on page 29). 4 Press the retaining buttons on each side of the HP UltraFlow airflow guide and lift it out of the PC Workstation's case. 5 Slide out the power supply to provide better access to the disk drive cables (see page 29). 6 Unscrew and remove an unused drive tray. Remove the drive tray English 43