HP OmniBook 6100 HP Omnibook 6100 - Corporate Evaluators Guide - Page 143
Windows will find ESS ESS56CVM-PI DATA FAX MODEM, press Next.
![]() |
View all HP OmniBook 6100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
Using Windows NT 4.0 Installing Retail Windows NT 4.0 3. After the audio drivers finish installing the Add Modem Wizard will appear so that you may configure the ESS software modem. If your computer has the USR Hardware modem you may cancel this portion of the installation. 4. Choose to allow system to detect modem, press Next. 5. Windows will prompt which port you would like to scan if you have Card Services installed. Choose COM5, and press Next. 6. Windows will find ESS ESS56CVM-PI DATA FAX MODEM, press Next. 7. Windows will prompt for which port you wish to install the driver for, choose COM5 and press Next and then Finish. 8. If this is the first modem device installed on to the system you will be ask to update the TAPI information which includes your area code and special dialing needs. Upon successful completion you will be asked to reboot your computer, choose YES if you have no other drivers to install. Otherwise, choose NO and continue to next step. To install Intel® SpeedStep™ Technology Applet If you've installed a retail version of Windows, you'll need to install the Intel SpeedStep Technology Applet if you have a dual-speed Pentium III processor. The driver is contained in the \HP\DRIVERS\SPEEDSTP subdirectory on the Recovery CD. To install or upgrade the Intel SpeedStep driver: 1. Run SETUP.EXE from the driver directory on your Recovery CD (\HP\DRIVERS\SPEEDSTP). 2. Follow the onscreen directions to complete installation. Upon successful completion you will be asked to reboot your computer, choose YES if you have no other drivers to install. Otherwise, choose NO and continue to next step. Corporate Evaluator's Guide 143
![](/manual_guide/products/hewlettpackard-omnibook-6100-hp-omnibook-6100-corporate-evaluators-guide-24ff46d/143.png)