HP OmniBook 6100 HP Omnibook 6100 - Corporate Evaluators Guide - Page 146
To install Intel wireless networking support
View all HP OmniBook 6100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
Using Windows NT 4.0 Installing Retail Windows NT 4.0 9. Click Next. 10. At the Protocol screen, click Next to accept the default setting of TCP/IP or choose other protocols. 11. At the Services screen, click Next to accept default settings or you may add additional NT services. 12. At the Summary screen, click Next. 13. Windows will prompt that it requires some files. If you copied them to the hard drive, enter C:\I386 in the message box or the location of these files. 14. Enter any settings on the Intel driver screen (if you installed the Intel driver). 15. Follow the onscreen directions to complete installation. 16. Upon successful completion you will be asked to reboot your computer, choose NO and continue to next step. 17. Reinstall the Windows NT service pack you installed earlier. 18. Choose YES to reboot your computer after installing the service pack. To install Intel wireless networking support If you have installed retail Windows and have 802.11b wireless LAN, you need to install the networking support. This section assumes that no networking has been installed on the system. To install or upgrade the networking driver: 1. Right click on Network Neighborhood and choose Properties. If you have no networking installed the system will ask you if you want to install networking now. Press YES. 2. Choose Wired to Network, press Next. 3. Press Select from List. 4. Press Have Disk. 5. In the dialog box enter the wirelessLAN driver directory. 6. Pick Actiontech Prism Wireless LAN PCI Card from the list, Press OK. 7. Press Next. 8. At the Protocol screen, press Next to accept the default setting of TCP/IP or choose other protocols. 9. At the Services screen, press Next to accept default settings or you may add additional NT services. 146 Corporate Evaluator's Guide