HP OmniBook 6100 HP Omnibook 6100 - Corporate Evaluators Guide - Page 75

CAUTION Add-On Devices Using Plug-In Modules Before disconnecting a CD-ROM drive, DVD drive, or any other type of drive, you must either use the icon in the taskbar or shut down the computer-otherwise, you could lose data. Exception: for Windows 98, you must shut down the computer before connecting or disconnecting a hard disk drive. Handle and store a module carefully when it's out of the computer. Do not drop it or apply excessive pressure to its surfaces-this could damage its internal mechanisms. Do not touch the metallic pins on the computer's connectors, module connectors, or cable connectors. Static electricity can damage internal components. 1. Close all files that are open from the plug-in module. 2. Windows 98: if the BayManager icon is present in the taskbar, right-click the icon, then click Remove/Swap Bay Device. When prompted, remove the module if one is present. Don't click OK until you've inserted the desired module, if any. Windows 2000 or XP: left-click the Unplug or Eject Hardware or Safely Remove Hardware icon on the taskbar, and select the module you want to remove. When prompted to remove the module, click OK. (You don't have to do this if the bay is empty or contains a battery.) -or- For any system: shut off the computer. Click Start, Shut Down, Shut down (Windows 98 or 2000) or Start, Turn Off Computer, Turn Off (Windows XP). Important: for Windows 98, you must shut off the computer if you are removing or inserting a hard disk drive in the module bay. 3. Press the button on the module release latch, and slide the latch toward the front of the computer. Corporate Evaluator's Guide 75