HP OmniBook 6100 HP Omnibook 6100 - Corporate Evaluators Guide - Page 149
Locate device CMD IDE Controller and click HW Profiles. This is the dock IDE
View all HP OmniBook 6100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
Using Windows NT 4.0 Installing Retail Windows NT 4.0 To create Windows NT Hardware profiles, do the following: 1. Double-click the System icon in the Control Panel. 2. Click the "Hardware Profiles" tab. 3. Click the original configuration profile, then click Copy, and enter a name for your docked configuration. 4. For each profile, click Properties on the Hardware Profiles tabs. − For the docked profile, click "This is a portable computer" on the "General" tab and click "The computer is docked". Click OK to close the Profile Properties window. − For the undocked profile, click "The computer is undocked". Click OK to close the Profile Properties window. 5. Move the profile you wish to be the default to the top by clicking the side arrows. 6. Click OK to close the "System Properties" window. 7. Double-click the Devices icon in the Control Panel. You will need to disable the appropriate devices in each hardware profile. 8. Locate device "CMD IDE Controller" and click HW Profiles. This is the dock IDE driver, and should be disabled in all undocked profiles. Highlight each undocked profile and click Disable. Click OK to exit. 9. Locate device Symc8xx and click HW Profiles. This is the dock SCSI driver, and should be disabled in all undocked profiles. Highlight each undocked profile and click Disable. Click OK to exit. 10. Click Close to close the Devices window. You can now reboot your computer. At each reboot you will be prompted for the appropriate profile to be used. Corporate Evaluator's Guide 149