HP OmniBook 6100 HP Omnibook 6100 - Corporate Evaluators Guide - Page 179

Troubleshooting and Maintenance Configuring the Computer System Devices Menu Setting Description PS/2 Pointing Devices Disables the internal pointing devices when an external PS/2 mouse is connected. External Fn Key Sets whether left CTRL+left ALT on an external keyboard is interpreted as the Fn key. FDD Controller Legacy USB Support Internal LAN Mini PCI Slot 1 Mini PCI Slot 2 Serial port Base I/O address Interrupt Infrared port Mode Base I/O address Interrupt DMA channel Parallel Port Mode Base I/O Interrupt DMA channel Enables the floppy drive. Enables BIOS support for USB mouse, keyboard, and floppy disk drive. Enables the internal (wired) LAN. Enables the PCI slot normally used for a wireless LAN. Enables the PCI slot normally used for a modem, which is located under the door on the bottom of unit. (Does not affect Ambit modem.) Enables the serial port. Sets the I/O address. Sets the I/O interrupt. Enables the infrared port. Sets the hardware to support FIR (Fast IR) or SIR (Standard IR) infrared communications. Sets the I/O address. Sets the I/O interrupt. Sets the DMA channel for Fast IR (FIR) mode. Enables the parallel port. Sets the port to output only, bi-directional, EPP, or ECP. Sets the I/O address. Sets the I/O interrupt. Sets the DMA channel for ECP mode. Default Auto Enabled Enabled Enabled Enabled Enabled Enabled Enabled 3F8h IRQ4 Disabled FIR 2F8h IRQ3 DMA0 Enabled ECP 378h IRQ7 DMA1 Corporate Evaluator's Guide 179