HP OmniBook xe3-gc HP OmniBook XE3 Series - Corporate Evaluator's Guide - Page 110
PC card problems
View all HP OmniBook xe3-gc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Troubleshooting Your Computer Troubleshooting Techniques 4. Click on the button of the key you want to reconfigure. 5. Select the application or website you want associated with the button. (See "To configure a One-Touch button" for more detail.) 6. Click Done, then OK. If the onscreen display does not appear when pressing a One-Touch button • Check that the Onscreen Display is enabled. 1. Click Start, Settings, Control Panel. 2. Double-click Keyboard. 3. Select the One-Touch buttons tab. 4. Click Change Onscreen Display. 5. Check Enable if it is not checked. 6. Click Done, then OK. PC card problems If the notebook doesn't recognize a PC card • Remove and reinsert the PC card. • If the card requires an IRQ, check that there is one available. Look in Device Manager, Properties, Interrupt Request (IRQ). • Check the HP notebook website for information about supported PC cards. • Try the card in another computer. • Reboot the computer. If an I/O card stops communicating properly • The card may have been reset if the computer in on standby or turned off. Exit any applications, then remove and reinsert the card. If a PC card modem is not working • In Windows 98, disable the internal modem. 1. Click Start, Settings, Control Panel. 2. Double-click System. 110 Corporate Evaluator's Guide