HP OmniBook xe3-gc HP OmniBook XE3 Series - Corporate Evaluator's Guide - Page 69
To switch the display to the external monitor, To adjust monitor resolution, To use dual display
View all HP OmniBook xe3-gc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Making Connections Connecting External Components To switch the display to the external monitor • Close the computer lid. OR • Press Fn+F5 (or Left Ctrl+Left Alt+F5 on an external keyboard) to cycle through the display options: notebook display, external monitor, both. To adjust monitor resolution 1. Click Start, Settings, Control Panel, Display. 2. On the Settings tab, adjust the Screen area. To use dual display mode You can extend the desktop by connecting an external monitor to your notebook. Dual display mode requires that your computer display be set as shown in the table below. Click Start, Settings, Control Panel, Display, Settings tab to adjust these settings. Notebook screen 12-inch Screen area 800×600 pixels 13-inch, 14-inch, or 15-inch 1024×768 pixels Colors 256 colors or High Color (16 bit) 256 colors or High Color (16 bit) or True Color (24 bit) 1. Set your notebook display settings according to the table above. 2. Click the Start Button and select Shut down. 3. Connect the monitor cable from the monitor to the VGA port on the rear of the computer or the port replicator. 4. Connect the monitor to a power source and turn it on. 5. Slide the power switch to turn on the computer. Windows will detect the second monitor and attempt to load the proper display driver. Follow the onscreen instructions. 6. Click Start, Settings, Control Panel, Display, Settings tab. Position the second monitor to the right or left of your notebook display to match your monitor location. 7. Make sure that the Settings box "Extend my Windows desktop onto this monitor" is checked. Corporate Evaluator's Guide 69