HP Pavilion a400 HP Pavilion Destkop PCs - (English) Users Guide PAV NA/CTO 59 - Page 112
Push the optical drive all the way in through the front of the PC until it snaps
View all HP Pavilion a400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
4 Make sure the jumper on the new drive is in the CS (Cable Select) position. CS SL MA NOTE: A jumper is a small plastic connector or wire that electrically connects two pins in order to define a configuration setting. Below is an example of drive with Cable Select jumper installed (your drive may vary). 5 Slide the new optical drive through the front of the PC. Don't slide the drive in all the way; you need room to attach the cables. 6 Connect the power cable and data cable to the back of the optical drive. Some drive models may have a sound cable. If so, connect the sound cable. 7 Push the optical drive all the way in through the front of the PC until it snaps into place (D). D 8 Replace the front panel. See page 101. 9 Replace the side panel. See page 99. 104 user's guide