HP Pavilion a400 HP Pavilion Destkop PCs - (English) Users Guide PAV NA/CTO 59 - Page 119
Master, Slave
View all HP Pavilion a400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
7 Make sure the jumper on the new drive is in the CS (Cable Select) position. Below is a drive with a Cable Select jumper installed. Your drive may vary. CS SL MA 8 Attach the power cable to the back of the drive. 9 Make sure you attach the connector marked Master on the IDE ribbon cable to the back of the primary hard drive. After this primary connection is attached, twist the remaining part of the cable marked Slave on that same IDE ribbon cable and connect it to the second hard drive. MASTER SLAVE To CPU WARNING: Make sure the IDE cable end labeled Master is connected to the primary hard drive. If you have a second hard drive, make sure the IDE cable labeled Slave is connected to the second hard drive. If the IDE cable is not connected correctly, the PC will not be able to locate the hard drives and data may be lost. upgrading and servicing the pc (1) 111