HP Presario S4000 Getting Started Compaq Presario S and 8000 Series Computer - Page 138
To Remove an Expansion Card
View all HP Presario S4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
Upgrading the PC To Remove an Expansion Card 1. Complete the procedure described in "Preparing the PC" on page 8-2, but do not remove the front bezel. ❏ To remove an expansion card from the S series, continue to step 2. ❏ To remove an expansion card from the 8000 series, skip to step 3. 2. On the S series, on the rear of the PC, remove the expansion bracket covering the expansion slots by removing the screw from the bracket cover 1, and then remove the expansion bracket cover 2. Removing the screw and expansion bracket cover on the S series 8-22 Getting Started
8–22
Getting Started
Upgrading the PC
To Remove an Expansion Card
1. Complete the procedure described in
“Preparing the PC” on page 8–2, but do
not remove the front bezel.
❏
To remove an expansion card from the
S series, continue to step 2.
❏
To remove an expansion card from the
8000 series, skip to step 3.
2. On the S series, on the rear of the PC, remove
the expansion bracket covering the expansion
slots by removing the screw from the bracket
cover
1
, and then remove the expansion
bracket cover
2
.
Removing the screw and expansion bracket cover
on the S series