HP Pro 4300 Maintenance & Service Guide HP Compaq Pro 4300 All-in-One Busi - Page 72
WLAN Module
View all HP Pro 4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
WLAN Module The WLAN module is located on the bottom left of the system board. The module is secured with one Phillips screw and has two connected antennas. Figure 6-54 WLAN module location To remove the WLAN module: 1. Prepare the computer for disassembly (see Preparing to Disassemble the Computer on page 26). 2. Remove the center access panel (see Hinge Cover Panel on page 27). 3. Remove the memory access panel (see Memory Access Panel on page 29). 4. Remove the drive access panel (see Drive Access Panel on page 31). 5. Remove the stand (see Stand on page 54). 6. Remove the optical drive (see Optical Drive on page 33). 7. Remove the top panel (see Top Panel on page 51). 8. Remove the rear cover (see Rear Cover on page 55). 9. Remove the heat sink cover (see Heat Sink Cover on page 45). 10. Remove the system board shield (see System Board Shield on page 62). 64 Chapter 6 Removal and Replacement Procedures All-in One (AIO) Chassis