HP Pro 4300 Maintenance & Service Guide HP Compaq Pro 4300 All-in-One Busi - Page 82
Removing the hard drive or optical drive connectors
View all HP Pro 4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
14. Disconnect the hard drive cables (4) or the optical drive cables (5) from the system board. NOTE: Be careful not to damage the cable when disconnecting it from the board. Do not pull on the wires. 15. Remove the connector from the computer. Figure 6-65 Removing the hard drive or optical drive connectors To install the hard drive or optical drive connector, reverse the removal procedures. 74 Chapter 6 Removal and Replacement Procedures All-in One (AIO) Chassis
14.
Disconnect the hard drive cables
(4)
or the optical drive cables
(5)
from the system board.
NOTE:
Be careful not to damage the cable when disconnecting it from the board. Do not pull
on the wires.
15.
Remove the connector from the computer.
Figure 6-65
Removing the hard drive or optical drive connectors
To install the hard drive or optical drive connector, reverse the removal procedures.
74
Chapter 6
Removal and Replacement Procedures All-in One (AIO) Chassis