HP StorageWorks 2/128 HP StorageWorks SAN Director 2/128 Installation Guide, V - Page 156
Setting Up a Remote Modem System, Remote modem setup, To set up the optional remote modem
View all HP StorageWorks 2/128 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
Setting Up and Installing Modems Setting Up a Remote Modem System After the modems are connected, you can use a telco system to dial in to the modems and verify that they answer and communicate as expected. If a dial-out modem facility is not available, you can use a terminal emulation program on a computer workstation (or laptop) that has an attached modem. This procedure is only required if a dial-out modem facility is not already available for testing the SAN Director 2/128 modem connections. To set up the optional remote modem: 1. Connect the remote modem to the workstation, as shown in Figure 30. 2. Disable any serial communication programs running on the workstation (such as a synchronization program for a PDA). Analog Telco PC or Laptop running Hyperterminal Rem Mo DB-25M to DB-9F Modem Cable 2.016 Figure 30: Remote modem setup 156 SAN Director 2/128 Installation Guide