HP StorageWorks 2/128 HP StorageWorks SAN Director 2/128 Installation Guide, V - Page 74
Set the Domain ID, Enter a unique Domain ID
![]() |
View all HP StorageWorks 2/128 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Installing and Configuring the SAN Director 2/128 Set the Domain ID Each switch in the fabric must have a unique Domain ID. The Domain ID can be set using the configure command. It is also possible to allow the Domain ID to be automatically set. Note: The default Domain ID for the SAN Director 2/128 is "1". To set the Domain ID, follow these steps: 1. Enter the fabricshow command to determine the current Domain IDs available. 2. Enter the switchdisable command to disable the SAN Director 2/128. 3. Enter the configure command. 4. Enter y at the "Fabric parameters" prompt: Fabric parameters (yes, y, no, n): [no] y 5. Enter a unique Domain ID: Domain: (1..239) [1] 3 6. Complete the remaining prompts or press Ctrl+D to accept the other settings and exit. 7. Enter the switchenable command to reenable the SAN Director 2/128. 74 SAN Director 2/128 Installation Guide
![](/manual_guide/products/hewlettpackard-storageworks-2128-hp-storageworks-san-director-2128-installation-guide-v42x-aarvusbte-2004-deadb4a/74.png)