HP StorageWorks 2/128 HP StorageWorks SAN Director 2/128 Installation Guide, V - Page 72
Customize a Switch Name, switch, HP StorageWorks, Fabric OS 4.2.x Command Reference Guide.
View all HP StorageWorks 2/128 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Installing and Configuring the SAN Director 2/128 Customize a Switch Name The switch name of the SAN Director 2/128 Director can be up to 15 characters long; can include alpha, numeric, and underscore characters; and must begin with an alpha character. The default name for the SAN Director 2/128 is "swDir". Including "swDir" in the name is recommended to allow easy identification. To customize the name, follow these steps: 1. Enter the switchname command with the new name in quotes. Example: swDir:admin> switchName "sw10" For details about the switchname command, refer to the HP StorageWorks Fabric OS 4.2.x Command Reference Guide. 2. Record the new name for future reference. Note: Changing the name causes a domain address format RSCN to be issued. 72 SAN Director 2/128 Installation Guide