HP StorageWorks 2/128 HP StorageWorks SAN Director 2/128 Installation Guide, V - Page 50
Attaching the left and right flat upper rack mount brackets
View all HP StorageWorks 2/128 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Installing and Configuring the SAN Director 2/128 3. Use four #10-32 x 5/16 inch screws to secure the right and left flat upper rack mount brackets to the chassis. See Figure 7. Note: Orient the slotted holes in the brackets toward the blower side of the chassis (see Figure 7 for orientation). 3 2 1 4 SHR-2511A 1 Left flat upper rack mount bracket 2 #10-32 x 5/16 inch screws (4) 3 Detached L-shaped brackets (1 of 2) 4 Right flat upper rack mount bracket Figure 7: Attaching the left and right flat upper rack mount brackets 4. Tighten the screws and torque to 32 inch-pounds. 50 SAN Director 2/128 Installation Guide
Installing and Configuring the SAN Director 2/128
50
SAN Director 2/128 Installation Guide
3.
Use four #10-32 x 5/16 inch screws to secure the right and left flat upper rack
mount brackets to the chassis. See
Figure 7
.
Note:
Orient the slotted holes in the brackets toward the blower side of the chassis (see
Figure 7
for orientation).
Figure 7:
Attaching the left and right flat upper rack mount brackets
4.
Tighten the screws and torque to 32 inch-pounds.
1
Left flat upper rack mount bracket
2
#10-32 x 5/16 inch screws (4)
3
Detached L-shaped brackets (1 of 2)
4
Right flat upper rack mount bracket
SHR-2511A
1
2
3
4