HP Surestore Tape Library Model 6/140 HP SureStore E Tape Library Model 6/140 - Page 103

Library Administration NOTE Table 3-8 Library Administration Running Library Diagnostic Tests Running Library Diagnostic Tests Main Menu -> Administration -> Run Test Use the following procedure to run internal tests of library functions. Table 3-8 on page 3-29 describes these tests. 1. From Administration, select [More] to display additional administrative options. Select the Run Test menu. 2. From Run Test, use the [-] or [+] key to view available tests. 3. Select [OK] to select the test. 4. Select the number of times this test will run. 5. Select [Run] to start the test cycle. The test results will display at the conclusion of the test cycle. Select [Stop] to abort a test. The current test cycle completes before the test stops. Stopping the test may take a few minutes. Front Panel Diagnostic Tests Test Check Inventory Recalibrate Library Description Physically scans the entire library to determine which slots and drives contain tapes and reads all bar code labels. Performs the power-up self-tests. Each test runs one time per test loop. This test recalibrates the mechanics and clears hard errors, but not the hard error log. Chapter 3 3-29