HP Surestore Tape Library Model 6/140 HP SureStore E Tape Library Model 6/140 - Page 79

Library Administration NOTE NOTE CAUTION Library Administration Enabling and Changing the Password Enabling and Changing the Password Administration procedures can be password protected. These procedures include: diagnostic tests, configurations, online drive repair, and setting the date and time. A password is also required for administration through the remote management card. Main Menu -> Administration -> Change Configuration -> Password When the library is first installed, the password is inactive. To protect the system from unauthorized access, use the following procedure to set a password. 1. Enter the Password menu. A status screen will indicate if a password is enabled. • If the password is turned off, select Set New Password to enable the password. • If the password is turned on, select Change Password to enter the new password. It must be exactly eight digits. • If the password is turned on, select Turn Password Off to clear the password. If you enter more than eight digits, the ninth digit will become the first digit of the new password. 2. Select [OK] to exit. Be sure to document the password. If you forget the password, contact your service representative. Chapter 3 3-5