HP Surestore Tape Library Model 6/140 HP SureStore E Tape Library Model 6/140 - Page 89
Configuring the Library for Fibre Channel, Fibre Channel, Main Menu, Administration
View all HP Surestore Tape Library Model 6/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
NOTE NOTE NOTE Library Administration Configuring the Library for Fibre Channel Configuring the Library for Fibre Channel Refer to Appendix C if you are unfamiliar with Fibre Channel terminology before beginning this procedure. The optional Fibre Channel interface(s) serves as a bridge between SCSI and Fibre Channel. It is not necessary to connect the library to its Fibre Channel topology (e.g. arbitrated loop or fabric) before configuration. Configuration When Fibre Channel interfaces are installed in the library, device SCSI IDs cannot be changed from their factory default. Though you do not need to set SCSI IDs for Fibre Channel, you will need to configure Fibre Channel addressing. Main Menu -> Administration -> Change Configuration -> Fibre Channel 1. Enter the Fibre Channel menu. 2. Select the level where the Fibre Channel interface you want to configure is located. Use the [-] key to select a lower level in the library. Use the [+] key to select a higher level in the library. Select [OK] if the level is correct. Chapter 3 3-15 Library Administration