HP Surestore Tape Library Model 6/140 HP SureStore E Tape Library Model 6/140 - Page 104

Table 3-8 Library Administration Running Library Diagnostic Tests Front Panel Diagnostic Tests Test Description Test Vertical Motion Moves the vertical assembly to the bottom of the library, then to the top, while the transport moves around its lateral range. Upon completion of these moves, the transport assembly then stops. Test Lateral Motion Moves the transport assembly to a random slot. No tape is required. Test Magazine Moves Moves a tape from a random slot to an empty, random slot, and then returns it to the original location. Wellness Test Moves a tape from a random slot to an empty drive, repeats the process until all drives are full, and then returns all tapes to their original slots. Rewind Media CAUTION: Do not run this test if the drive contains a tape that is receiving data from the host. Rewinds the tape in the drive. Lock Transport Locks the transport assembly in place to allow for shipping the library. Power down the library after running this test. Library motion commands may fail if issued after the transport assembly is locked. NOTE: The transport assembly automatically unlocks when the library is powered on. Unlock Transport Unlocks the transport assembly without power cycling the library. The transport must have already been locked to use this test. NOTE: The transport assembly automatically unlocks when library is powered on. 3-30 Chapter 3