HP Surestore Tape Library Model 6/140 HP SureStore E Tape Library Model 6/140 - Page 24
Setting Up the Library
View all HP Surestore Tape Library Model 6/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Figure 1-2 Getting Started Installing the Library (for Authorized Service Personnel only) Setting Up the Library 1. Carefully move the library to the installation location (see "Choosing a Location" on page 1-6). 2. Lower the library's leveler feet using a 1/2-inch open-end wrench. 3. Secure the library to the floor (optional). Figure 1-2 illustrates the library cabinet hole pattern for attaching floor mounting brackets. The pattern is repeated on the front and rear of the cabinet base. All holes are threaded 1/4 - 20. Library Cabinet Hole Pattern 1-8 Chapter 1
Getting Started
Installing the Library (for Authorized Service Personnel only)
Chapter 1
1-8
Setting Up the Library
1.
Carefully move the library to the installation location (see
“
Choosing
a Location
”
on page 1-6).
2.
Lower the library
’
s leveler feet using a 1/2-inch open-end wrench.
3.
Secure the library to the floor (optional). Figure 1-2 illustrates the
library cabinet hole pattern for attaching floor mounting brackets.
The pattern is repeated on the front and rear of the cabinet base. All
holes are threaded 1/4 - 20.
Figure 1-2
Library Cabinet Hole Pattern