HP nx8220 Hardware and Software Guide - Page 171
Entering a Power-On Password, Security > Power-On, password, New Password, Verify New Password
View all HP nx8220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
Security 3. Open Computer Setup by turning on or restarting the notebook. Press f10 while the "F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen. ❏ To change the language, press f2. ❏ For navigation instructions, press f1. 4. Use the arrow keys to select Security > Power-On password, and then press enter. ❏ To set a power-on password, type the password in the New Password and Verify New Password fields, and then press f10. ❏ To change a power-on password, type the current password in the Old Password field, type the new password in the New Password and Verify New Password fields, and then press f10. ❏ To delete a power-on password, type the current password in the Old Password field, and then press f10. 5. To save your preferences, use the arrow keys to select File > Save Changes and Exit. Then follow the instructions on the screen. Your preferences are set when you exit Computer Setup and take effect when the notebook restarts. Entering a Power-On Password At the power-on password prompt, type your password, and then press enter. After three unsuccessful attempts to enter the password, you must restart the notebook and try again. 12-10 Hardware and Software Guide