HP nx8220 Hardware and Software Guide - Page 232
MultiBoot Results - docking station
View all HP nx8220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 232 highlights
MultiBoot MultiBoot Results Before changing the startup sequence, consider the following: ■ When the notebook restarts after the boot order has been changed, it considers only the first of each type of device (except for optical devices). For example, the notebook is connected to an optional docking device (select models only) that contains a hard drive. This hard drive is shown in the boot order in Computer Setup as "USB hard disk." If this drive is placed before the primary hard drive in the boot order, and if the system fails to boot to the drive in the docking station, it will not attempt to boot to the primary hard drive. Instead, it will try to boot to the next type of device in the boot order (diskette, optical device, or NIC). However, if there are two optical devices and the first optical device does not boot (either because it does not contain media or the media is not bootable), the system will try to boot to the second optical device. ■ Changing the boot sequence also changes the logical drive designations. For example, if you start up from an optical drive with a disc that boots as drive C, that optical drive becomes drive C and the hard drive in the hard drive bay becomes drive D. ■ Starting up from a NIC does not affect logical drive designations because no drive letter is associated with the NIC. ■ Drives in an optional docking device are treated like external USB devices in the boot sequence and must be enabled in Computer Setup. Hardware and Software Guide B-5