IBM 8872 Service Guide - Page 124
Memory, memory, module
![]() |
UPC - 000435813060
View all IBM 8872 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
6. Slide the server into the rack. Memory card and memory module (DIMM) The server supports 333 MHz, 1.8V, 240 pin, PC2-3200 single-ranked double data-rate (DDR) II, registered synchronous dynamic random-access memory (SDRAM) with error correcting code (ECC) DIMMs. These DIMMs must be compatible with the latest PC2-3200 SDRAM Registered DIMM specifications. For a list of the supported options for the server, see http://www.ibm.com/us/compact/. Removing and replacing a memory card At least one memory card with one pair of DIMMs must be installed for the server to operate correctly. To remove the memory card, complete the following steps: DCAC 1. Read the safety information that begins on page vii and "Installation guidelines" on page 99. 2. Remove the top cover (see "Top cover and bezel" on page 113). Attention: To ensure proper cooling and airflow, do not operate the server for more than 2 minutes with the top cover removed. 3. Open the locking levers on the edge of the memory card; then, lift the memory card out of the server. 4. If you are instructed to return the memory card, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you. To install the replacement memory card, complete the following steps: 108 IBM xSeries 460 Type 8872 and xSeries MXE 460 Type 8874: Problem Determination and Service Guide
![](/manual_guide/products/ibm-8872-service-guide-0d7ed5c/124.png)