IBM 8872 Service Guide - Page 134
PCI-X, adapter, guide
UPC - 000435813060
View all IBM 8872 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
3. Slide the front-panel assembly into the server until the blue tab on the chassis engages. 4. Install the top cover and bezel (see "Top cover and bezel" on page 113). 5. Slide the server into the rack. 6. Connect the cables and power cords (see "Completing the installation" in the Installation Guide or User's Guide for cabling instructions). 7. Turn on all attached devices and the server. PCI-X adapter guide To remove the PCI-X adapter guide, complete the following steps. Latch mechanism Quarter-turn fasteners 1. Read the safety information that begins on page vii and "Installation guidelines" on page 99. 2. Turn off the server and peripheral devices, and disconnect the power cords and all external cables necessary to replace the device. 3. Remove the top cover (see "Top cover and bezel" on page 113). 4. Lift the latch mechanism. 5. Remove all adapters and adapter dividers, and place the adapters on a static-protective surface. Note: You might find it helpful to note where each adapter is installed before removing the adapters. 6. Disconnect one end of all cables that pass through the PCI-X adapter guide; then, remove the cables from the routing feature of the guide and fold the cables out of the way. Note: You might find it helpful to note where each cable is connected before disconnecting the cables. 7. Turn the blue quarter-turn fasteners to release the PCI-X adapter guide. 8. Lift the guide out of the server. 118 IBM xSeries 460 Type 8872 and xSeries MXE 460 Type 8874: Problem Determination and Service Guide