Icom IC-R8600 Instruction Manual - Page 12
Rear panel, I/Q DATA OUTPUT PORT [I/Q OUT] pp. 2-3
View all Icom IC-R8600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
1 PANEL DESCRIPTION Rear panel !1 !2 !3 !4 !5 !6 !7 q !0 o w i uy t r e q DC POWER SOCKET [DC 13.8 V] (pp. 2-1, 16-2) Connects to the supplied DC power cable. w DC INPUT JACK [DC IN] (pp. 2-1, 16-2) Connects to the optional SP-39AD (External speaker with built-in power adapter) or AD-55NS (Power adapter). LBefore connecting an SP-39AD or AD-55NS, connect the supplied DC power short connector to [DC 13.8V] (q). e GROUND TERMINAL [GND] (p. 2-1) Connects to ground to prevent electrical shocks and other problems. r ANTENNA CONNECTOR [ANT1] (N type) (p. 2-2) Connects to a 10 kHz ~ 3000 MHz antenna. t ANTENNA CONNECTOR [ANT2] (SO-239) (p. 2-2) Connects to a 10 kHz ~ 30 MHz antenna. y ANTENNA CONNECTOR [ANT3] (RCA) (p. 2-2) Connects to a 10 kHz ~ 30 MHz antenna. !2 EXTERNAL SPEAKER JACK [EXT-SP] (pp. 2-3, 16-2) Connects to an optional external speaker SP-39AD (External speaker with built-in power adapter). (3.5 mm: 1/8 in (d)) LAccepts a 4~8 Ω speaker. !3 AF/IF OUTPUT JACK [AF/IF] (pp. 2-3, 16-1) Outputs the demodulated AF signal, or a 12 kHz IF signal. LThe output level is set, regardless of the volume control. !4 R EMOTE CONTROL JACK [REMOTE] (pp. 2-3, 16-2) Connects to a PC for remote control using CI-V commands. (3.5 mm: 1/8 in (d)) !5 [USB] (B type) PORT (p. 2-3, 16-1) Connects to a PC. ••Outputs the decoded FSK (RTTY) or D-STAR data. ••Outputs the demodulated AF signal or 12 kHz IF signal. ••Interface for the optional CS-R8600 or RS-R8600. ••Interface for the remote control by the CI-V commands. u AUX JACK [AUX] A reserved jack. No internal connection. !6 [MUTE] JACK/[MUTE] SWITCH (pp. 2-3, 16-1) Used for the Mute function, or Bit Error Rate (BER) Measurement function. (3.5 mm: 1/8 in (d)) i EXTERNAL METER JACK [METER] (pp. 2-3, 16-1) Connects to an external analog RSSI or squelch level meter (user supplied). LSlide the switch to the left when you use the Mute function. The IC-R8600's receive circuitry is deactivated by the input voltage. LSlide the switch to the right when you use the BER o R EFERENCE SIGNAL INPUT/OUTPUT Measurement function. CONNECTOR [REF I/O 10MHz] (BNC) (p. 16-1) Inputs or outputs a 10 MHz reference frequency signal. !7 LAN PORT [LAN] (pp. 2-3, 16-1) Connects to a network to use the functions shown !0 IF SIGNAL OUTPUT CONNECTOR [10.7MHz OUT] (BNC) (p. 16-1) Outputs a 10.7 MHz IF signal. below. ••Automatic time synchronization. ••Outputs the received signal in demodulated AF signal, or in 12 kHz IF signal, through the network. !1 I/Q DATA OUTPUT PORT [I/Q OUT] (pp. 2-3, 16-1) ••Remotely controlling using the optional RS-R8600. Outputs I/Q data. LConnect a USB (1.1/2.0 standard) port (B type). 1-3