Icom IC-R8600 Instruction Manual - Page 87

15 OPTIONS Options AD-55NS AC ADAPTOR • 15 V/2 A SP-41 EXTERnAL SPEAKER • 5 W/8 Ω SP-39AD EXTERnAL SPEAKER WITH BUILT-In POWER SUPPLY • 15 V/2 A • 4 W/8 Ω The shape may differ, depending on the version. 145(W)×118(H)×227(D) mm 5.7(W)×4.65(H)×10.9(D) inch (Projections not included) • Same height as the IC-R8600. (Has a desktop stand.)  AH-710 FOLDED DIPOLE AnTEnnA Covers 2 to 30 MHz frequency range. Element length: 24.5 m (80.4 ft) Coaxial cable (supplied): 30 m (98.4 ft)  AH-8000 SUPER WIDEBAnD OMnIDIRECTIOnAL AnTEnnA Covers 100 to 3300 MHz frequency range. Type of antenna: Discone Weight (approximate): 970 g  SP-23 EXTERnAL SPEAKER 145.0(W)×111.0(H)×282.5(D) mm 5.7(W)×4.4(H)×11.1(D) inch (Projections not included)  MB-123 CARRYInG HAnDLE  CS-R8600 CLOnInG SOFTWARE  RS-R8600 REMOTE COnTROL SOFTWARE Approved Icom optional equipment is designed for optimal performance when used with an Icom receiver. Icom is not responsible for the destruction or damage to an Icom receiver in the event the Icom receiver is used with equipment that is not manufactured or approved by Icom. Attaching the MB-123 The optional MB-123 carrying handle with the rubber feet is convenient for carrying the receiver. 1. Attach the rubber feet supplied with the MB-123 to the receiver. To firmly attach, push-in the center part of the rubber feet. 2. Attach the carrying handle using the supplied screws as shown to the right. R WARNING! NEVER use other than the screws supplied with the MB-123. Rubber feet (Supplied with MB-123) Push-in the center part Rubber feet 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Carrying handle 15-1