Icom IC-R8600 Instruction Manual - Page 80
Touch screen calibration, MAINTENANCE, Others, TIP: When the touch screen is not accurate,
View all Icom IC-R8600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
12 MAINTENANCE Touch screen calibration When no screen action occurs, or a different function is activated after touching the screen, the touched point and the detected point may be different. In that case, the Touch screen calibration function helps to correct the touch screen sensing accuracy. 1. Open the OTHERS screen. MENU » SET > Others 2. Touch "Touch Screen Calibration." ••A dot appears on the screen. 3. Touch the dot that appears on the screen. dot ••A new dot appears in another position. 4. Repeat step 3. LWhen the calibration is complete, the receiver returns to the OTHERS screen. 5. Touch the frequency readout or key on the screen, to check the sensing accuracy was corrected. TIP: When the touch screen is not accurate, and you cannot access the OTHERS screen. Do the following steps to correct the touch screen sensing accuracy. 1. Turn OFF the receiver power. 2. While holding down MENU and EXIT , push POWER to display the "Touch Window Calibration" screen, and then release MENU and EXIT . 3. Repeat the above touch screen calibration procedure. 12-3