Icom IC-R8600 Instruction Manual - Page 72
Connectors, SET MODE, Output Select, AF Output Level, AF SQL
View all Icom IC-R8600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
11 SET MODE Connectors MENU » SET > Connectors Phones Level Ratio (Default: 1.00) Sets the output ratio of the speaker output level and headphones output level. • Range: 0.40 ~ 2.00 AF/IF > Output Select (Default: AF) Selects the signal output from [AF/IF]. ••AF: The demodulated AF signal is output. ••IF: A 12 kHz IF signal is output. LYou can listen to the Digital Radio Mondiale (DRM) broadcast with an application software receiver if it is installed into your PC. AF/IF > AF Output Level (Default: 50%) Sets the AF output level of [AF/IF]. ••Range: 0 ~ 100% LAt 50% (default), the output level is 200 mV (RMS). AF/IF > AF SQL (Default: OFF (OPEN)) Selects whether or not to output the audio from [AF/IF], according to the squelch and signal levels. ••OFF(OPEN): T he squelch is always opened regardless of the squelch and signal levels. ••ON: T he squelch opens and closes, according to the squelch and signal levels. AF/IF > AF Beep/Speech... Output (Default: OFF) Sets the Beep and Speech audio output status of [AF/IF]. ••OFF: The beep and speech audio are not output from [AF/IF]. ••ON: The beep and speech audio are output from [AF/IF]. AF/IF > IF Output Level (Default: 50%) Sets the IF output level of [AF/IF]. ••Range: 0 ~ 100% LAt 50% (default), the output level is 200 mV (RMS). USB (Front) > Output Select (Default: AF) Selects the signal output from [USB] on the front panel. ••AF: The demodulated AF signal is output. ••IF: A 12 kHz IF signal is output. LYou can listen to the Digital Radio Mondiale (DRM) broadcast with the application software receiver that is installed into your PC. USB (Front) > AF Output Level (Default: 50%) Sets the AF output level of [USB] on the front panel. ••Range: 0 ~ 100% USB (Front) > AF SQL (Default: OFF (OPEN)) Selects whether or not to output the audio from [USB] on the front panel, according to the squelch and signal levels. ••OFF(OPEN): T he squelch is always opened regardless of the squelch and signal levels. ••ON: T he squelch opens and closes, according to the squelch and signal levels. USB (Front) > AF Beep/Speech... Output (Default: OFF) Sets the Beep and Speech audio output status of [USB] on the front panel. ••OFF: The beep and speech audio are not output from [USB] on the front panel. ••ON: The beep and speech audio are output from [USB] on the front panel. USB (Front) > IF Output Level (Default: 50%) Sets the IF (12 kHz) output level of [USB] on the front panel. ••Range: 0 ~ 100% USB (Front) > Serial Function (Default: FSK Decode) Selects the signal output from [USB] on the front panel. ••FSK Decode: An FSK decoded signal is output. ••D-STAR Data: A D-STAR data is output. USB (Front) > FSK Decode Baud Rate (Default: 9600) Selects the data transfer rate (Baud rate) of decoded FSK signals from [USB] on the front panel. ••Options: 4800, 9600, 19200 or 38400 (bps) USB (Front) > D-STAR Data Baud Rate (Default: 9600) Selects the data transfer rate (Baud rate) of decoded D-STAR data from [USB] on the front panel. ••Options: 4800 or 9600 (bps) USB (Rear) > Output Select (Default: AF) Selects the signal output from [USB] on the rear panel. ••AF: The demodulated AF signal is output. ••IF: A 12 kHz IF signal is output. LYou can listen to the Digital Radio Mondiale (DRM) broadcast with the application software receiver that is installed into your PC. USB (Rear) > AF Output Level (Default: 50%) Sets the AF output level of [USB] on the rear panel. ••Range: 0 ~ 100% LAt 50% (default), the output level is 200 mV (RMS). 11-5