Icom IC-R8600 Instruction Manual - Page 66
Timer, Setting the Sleep timer
View all Icom IC-R8600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
10 CLOCK AND TIMER Timer DDSetting the Sleep timer The Sleep timer automatically turns OFF the receiver power after the set period of time ends. ••Settable range: 5 ~ 120 minutes (in 5 minutes steps) 1. Hold down for 1 second. 2. Touch [Sleep Timer]. DDSetting the Daily timer The IC-R8600 automatically turns power ON or OFF on the specified day and time. LYou can set up to 3 timer slots for different timer setting. 1. Hold down for 1 second. 2. Touch to select a timer slot. 3. Rotate to set the desired length of time. TIMER screen 3. Rotate to set each item for the timer slot. (Example: TIMER1). LSee page 10-3 for each item's details. LPush to reset to the default setting or cancel. 4. Touch [SET]. ••The timer LED lights orange. ••10 seconds before the sleep timer period ends, the receiver starts sounding beeps and the timer LED blinking, then turns OFF. LWhen the sleep timer ends, the time period set in step 3 is cleared. LEach push of stops and resumes the timer. 5. To close the TIMER screen, push EXIT several times. NOTE: About the Timer accuracy Since the Sleep timer counts in 'minute' steps (not counts in 'second' steps), it may have maximum 59 seconds of error. 4. After you configure the Timer, touch []. ••The "Set Timer?" dialog appears. 5. Touch [YES]. ••The timer LED lights orange. LWhen the Power OFF Timer is set: 10 seconds before the sleep timer period ends, the receiver starts sounding beeps and the timer LED blinking, then turns OFF. LEach push of stops and resumes the timer. Power ON time Day of the week Repeat ON Timer activated Power OFF time Reserved channel 6. T o close the TIMER screen, push EXIT several times. 10-2