Icom IC-R8600 Instruction Manual - Page 89
Remote], Ext-sp], Dc In], Dc13.8v], Ant 1], Phones], Warning! Never Reverse
View all Icom IC-R8600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
16 CONNECTOR INFORMATION [REMOTE] Used to remotely controls the receiver with the CI-V format data. (3.5 mm, 1/8 in (d)) LYou can download the USB driver and installation guide from the Icom website. https://www.icomjapan.com/support/ [EXT-SP] Connects to an external speaker such as the optional SP-39AD. (3.5 mm, 1/8 in (d)) [DC IN] Connects to the optional SP-39AD. In the remote control mode, push [LOCAL] to return to the normal (Local) mode (LOCAL LED turns OFF). *Except , and . ••Output impedance: 4 ~ 8 Ω ••Output level: More than 2 W at 10% distortion into an 8 Ω load. When SP-39AD or AD-55NS is connected, connect the supplied DC short connector to [DC13.8V]. [DC13.8V] Accepts the regulated DC power for 13.8 V DC (±15%), through the supplied DC power cable. [ANT 1] WARNING! NEVER reverse the DC power cable polarity (Red= , Black= ). View from the rear N type ••Frequency range: 10 kHz ~ 3000 MHz ••Input impedance: 50 Ω (unbalanced) LW hen the receive frequency is set to between 10 kHz and 29.999999 MHz, you can select the antenna on [ANT 1] ~ [ANT 3]. (p. 3-3) [ANT 2] SO-239 ••Frequency range: ••Input impedance: 10 kHz ~ 30 MHz 50 Ω (unbalanced) [ANT 3] LFor a long wire antenna. RCA type ••Frequency range: ••Input impedance: 10 kHz ~ 30 MHz 400 ~ 500 Ω (unbalanced) [AUX] RCA type A reserved terminal. No internal connection. [PHONES] Connects to standard stereo headphones. (3.5 mm, 1/8 in (d)) ••Output impedance: 8 ~ 16 Ω ••Output level: More than 50 mW (into an 8 Ω load) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 16-2