Icom IC-R8600 Instruction Manual - Page 34
Noise Blanker (NB), Noise Reduction, Duplex operation, OTHER FUNCTIONS, LEVEL, DEPTH, WIDTH
View all Icom IC-R8600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
5 OTHER FUNCTIONS Noise Blanker (NB) SSB, CW, FSK and AM modes The Noise blanker eliminates pulse-type noise such as the noise from car ignitions. 1. On the FUNCTION screen, touch [NB]. LEach touch turns the Noise Blanker function ON or OFF. 2. To change the NB level, depth or width, touch [NB] for 1 second. ••Turns ON the Noise Blanker and opens the NB menu. 3. Touch the adjusting item. (Example: DEPTH) 4. Rotate to adjust the level. Noise Reduction The Noise Reduction function digitally reduces random noise components, and enhances desired signals that are buried in noise. LThe function is effective in the SSB, AM and CW modes. 1. On the FUNCTION screen, touch [NR]. LEach touch turns the Noise Reduction function ON or OFF. 2. To change the Noise Reduction level, touch [NR] for 1 second. ••Turns ON the Noise Reduction and opens the NR menu. 3. Set the Noise Reduction level to between 0 and 15. ••Adjust the Noise Reduction level to where noise is reduced and the received signal is not distorted. LSet to a higher level to increase the reduction level, and a lower level to decrease it. NOTE: When using the Noise Blanker, received signals may be distorted if they are excessively strong or the noise is other than a pulse type. In that case, turn the OFF Noise Blanker, or shallow the DEPTH on the NB menu. See the description below for details. Noise Blanker OFF Pulse-type noise Noise Blanker ON LEVEL Pulse-type noise eliminated Receive signal Receive signal NB WIDTH Noise Blanker ON (Not enough DEPTH) Pulse-type noise remains Receive signal Noise Blanker ON (WIDTH set too wide) Part of the receive signal is eliminated along with pulse-type noise Receive signal Duplex operation You can receive a communication that uses different frequencies for transmitting and receiving (Duplex), by setting the offset frequency and shift direction. 1. On the FUNCTION screen, touch [DUP]. ••Each touch changes between [DUP-], [DUP+] and [OFF]. 2. To change the frequency offset or shift direction, touch [DUP] for 1 second. 3. Touch the numeric keys or rotate , to set the frequency offset. ••Settable range: 0.000 ~ 200.000 MHz (1 kHz step) Receive frequency Offset frequency (When the Monitor function is ON.) LEVEL (Default: 50%) Set the Noise Blanker activation level to between 0 and 100%. Touch to change the Shift direction DEPTH (Default: 8) 4. Hold down to turn ON the Monitor function. Adjust the noise attenuation level between 1 and 10. ••T he receive frequency shifts according to the set frequency offset and direction, while holding down . WIDTH (Default: 50) ••[DUP-] or [DUP+] blinks when the shifted frequency is out of receive frequency range. Adjust the blanking duration time between 1 and 100. ••The frequency offset and direction is stored in each memory channel. ••When the frequency offset is set to 0.000 MHz, the 5-4 receive frequency is not shifted.