Icom IC-R8600 Instruction Manual - Page 77
Time Set, SD Card, Others, <<NTP TIME SYNC>>, NTP Function, NTP Server Address
View all Icom IC-R8600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
SET MODE 11 Time Set SD Card (Continued) MENU » SET > Time Set Date/Time > Date (Default: 2000/01/01) Sets the date* (Year/Month/Day). ••Settable range: 2000/01/01 ~ 2099/12/31 LThe day of the week is automatically set. LIf the NTP Function is ON and receiver is connected to Internet, these items are automatically set. Date/Time > Time (Default: 0:00) Sets the current time. ••Settable range: 0:00 ~ 23:59 LThe time is displayed in the 24 hour format. LIf the NTP Function is ON and receiver is connected to Internet, these items are automatically set. Date/Time > Touch to synchronize the internal clock to the NTP server. ••Automatically obtains the current time from the NTP server. Date/Time > NTP Function (Default: ON) Automatically obtains the current time from the NTP server. • OFF: Turn OFF the function. • ON: Use the function. (An internet access is necessary.) Date/Time > NTP Server Address (Default: time.nist.gov) Sets the NTP server address. LDo not change this setting, unless it is necessary. LRefer to page 1-7 for the character entering. UTC Offset (Default: + 0:00) Sets the UTC offset time. ••Range: -14:00 to +14:00 (in 5 minute steps) SD Card MENU » SET > SD Card Load Setting Selects the saved data file to load. LSee "Using An SD Card" in Section 7 for data load details. Save Setting Saves the setting data onto an SD card. LSee "Using An SD Card" in Section 7 for data write details. Save Form (Default: Now Ver) Selects the save version format to save the Memory channels, the Set mode settings, and so on to an SD card. ••Now Ver: Saves the setting data in the current version format. ••Old Ver (x.xx - x.xx): Saves the setting data in the older version format (x.xx - x.xx). NOTE: ••If you select "Old Ver (x.xx - x.xx)," a function that is added when the receiver's firmware format is updated will not be saved. ••You cannot write a setting file that is saved in the current version format to an earlier firmware version IC-R8600. SD Card Info Displays the SD card capacity and the time remaining for recording. Screen Capture View Displays the selected screen capture. LSee "Screen Capture function" (p. 5-11) for details. Firmware Update Enters the Firmware Update mode. LSee "Updating the firmware" (p. 13-1) for details. Format Formats the SD card. LSee "Formatting an SD card" (p. 7-2) for details. Unmount Unmounts the SD card. NOTE: Before you remove a card when the receiver is ON, be sure to electrically unmount it (p. 7-1). Otherwise the data may be corrupted or deleted. Others MENU » SET > Others Information > Version Displays the firmware version. Information > MAC Address Displays the receiver's MAC address. Clone > Clone Mode Touch to enter the cloning mode. LThe cloning mode is cancelled on restart. Touch Screen Calibration Touch to adjust the touch screen. LTouch the white dots that sequentially appears on the screen. Touch to enter or quit the BER Measurement mode. ••"BER" is displayed while in the measurement mode. ••P ush to select the testing signal type (Clock/Data or UART) and measurement mode (General or P25 specific). Reset > Partial Reset Touch to return all the settings to their factory defaults except the memory channels. LSee "Resetting" (p. 12-2) for details. Reset > All Reset Touch to return all the settings to their factory defaults, and clears all the memory channels. LSee "Resetting" (p. 12-2) for details. 11-10 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21