Icom IC-R8600 Instruction Manual - Page 49
MEMORY OPERATION, Memory channels, Selecting channel group, Selecting with [▲GRP]/ [▼GRP]
View all Icom IC-R8600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
8 MEMORY OPERATION Memory channels Selecting channel group GROUPS MEMORY CHANNELS USAGE Group 00 ~ 99 (100 groups) 00 ~ 99 Has 100 memory groups. LUp to 2000 channels can be separately stored in the 100 memory channel groups. Automatically stores Auto Memory Write channels A000 ~ A199 (200 channels) frequencies into each 200 channels when a signal is received during an Auto Memory Write scan. 100 scan skip channels can be stored into the memory channels. These Scan Skip channels S00 ~ S99 (100 channels) scan skip channels are used for the Programmable scan, Fine Programmable scan, Auto Write Memory scan, ∂F scan, Fine ∂F scan and Programmable Skip scan. Program Scan Edges 50 pair of scan edges for the lower and upper P00A /P00B ~ P49A/P49B (50 pairs) frequency edges can be programmed. LThe same pair of frequencies are written as the default. LYou cannot clear nor leave them blank. DDSelecting with / 1. Push V/M to select the Memory mode. 2. Push or to select the group. LYou can select only groups that contain a channel. LIn the VFO mode, you can select blank groups. Program scan edge Group No. (Example:00) Group No. (Example:01) DDSelecting on the GROUP SELECT screen 1. Touch the Memory channel number. 2. Touch [GROUP]. [Memory channel tree view] Group Memory Channel Group 00 Memory Channel 00 Memory Channel 99 Memory Channel Group 99 Auto Memory Write Channel A000 Auto Memory Write Channel A199 Scan Skip Channel S00 Scan Skip Channel S99 Program Scan Edge P00A/P00B Program Scan Edge P49A/P49B 3. Rotate and touch to select a memory group (00 ~ 99, A, S or P). Up to 2000 channels* *100 channels in each group 200 channels 100 channels 50 pairs 4. Push to close the VFO/MEMORY screen. 8-1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21