Icom IC-R8600 Instruction Manual - Page 65
CLOCK AND TIMER, Setting the Time and Date, Setting date, NTP Time Server
View all Icom IC-R8600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
10 CLOCK AND TIMER Setting the Time and Date Manually set date and time without accessing the time management server. DDSetting date 1. Open the Date screen. MENU » SET > Time Set > Date/Time > Date 2. Touch [+] or [-] to set the date. 3. Touch [SET] to store the entry. 4. To close the Date screen, push EXIT several times. DDSetting time 1. Open the Time screen. MENU » SET > Time Set > Date/Time > Time 2. Touch [+] or [-] to set the current time. 3. Touch [SET] to store the entry. 4. To close the Time screen, push EXIT several times. NOTE: The backup battery for the internal clock The IC-R8600 has a rechargeable Lithium battery to backup the internal clock. If you connect the receiver to a power source, the battery is charged and it keeps the correct clock setting. However, if you do not connect the receiver to a power source for a long period of time, the battery will discharge. In that case, the receiver resets the internal clock. If you do not use the receiver for a long period, we recommend that you connect the receiver to a power source at least once a month. The charging period is two days whether the receiver's power is ON or OFF. NTP Time Server The NTP function periodically synchronizes the internal clock with the time management server. 1 LTo use this function, an internet connection are necessary. 2 DDExecute the time synchronization The IC-R8600 accesses the NTP server address that 3 is set in the "NTP Server Address" item. 4 1. Open the DATE/TIME screen. MENU » SET> Time Set > Date/Time 5 2. Touch . 6 7 8 9 ••The "Connecting to the NTP server" dialog is 10 displayed. 3. When the "Succeed" dialog is displayed, touch 11 [OK]. 4. To close the DATE/TIME screen, push EXIT 12 several times. 13 DDSetting the NTP Server address 1. Open the DATE/TIME screen. 14 MENU » SET > Time Set > Date/Time 15 2. Touch [NTP Server Address]. 3. Enter the address using the keypad, then touch 16 [ENT]. 4. To close the DATE/TIME screen, push EXIT 17 several times. 18 19 20 21 10-1