Icom IC-V8000 Instruction Manual - Page 28

Repeater Operation

Get Icom IC-V8000 PDF manuals and user guides View all Icom IC-V8000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

4 REPEATER OPERATION Accessing a repeater q Set the receive frequency (repeater output frequency). (pgs. 9, 10) w Push [LOW(DUP)] for 1 sec., one or two times, to select minus duplex or plus duplex. • "-" or "+" appears to indicate the transmit frequency for minus shift or plus shift, respectively. • When the auto repeater function is turned ON (available for the USA and CSA versions), steps w and e are not necessary. (p. 23) [LOW(DUP)] Either "-" or "+" appears. e Push [TONE(T-SCAN)] several times to turn ON the subaudible tone encoder, according to repeater requirements. • " " appears • 88.5 Hz is set as the default; refer to p. 19 for tone frequency settings. • When the repeater requires a different tone system, see p. 20. r Push and hold [PTT] to transmit. • The displayed frequency automatically changes to the transmit frequency (repeater input frequency). • If "OFF" appears, confirm that the offset frequency (p. 21) is set correctly. t Release [PTT] to receive. While receiving. While transmitting yPush [MONI(ANM)] to check whether the other station's transmit signal can be received directly. uTo return to simplex operation, push [LOW(DUP)] for 1 sec., once or twice, to clear the "-" or "+" indicator. iTo turn OFF the subaudible tone encoder, push [TONE(TSCAN)] several times until no tone indicators appear. [TONE(T-SAN)] 17 Appears

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
17
REPEATER OPERATION
4
■
Accessing a repeater
q
Set the receive frequency (repeater output frequency).
(pgs. 9, 10)
w
Push [LOW(DUP)] for 1 sec., one or two times, to select
minus duplex or plus duplex.
• “–”
or
“
+
”
appears to indicate the transmit frequency for minus
shift or plus shift, respectively.
•
When the auto repeater function is turned ON (available for the
USA and CSA versions), steps
w
and
e
are not necessary.
(p. 23)
e
Push [TONE(T-SCAN)] several times to turn ON the sub-
audible tone encoder, according to repeater requirements.
•
“
”
appears
•
88.5 Hz is set as the default; refer to p. 19 for tone frequency set-
tings.
•
When the repeater requires a different tone system, see p. 20.
r
Push and hold [PTT] to transmit.
•
The displayed frequency automatically changes to the transmit
frequency (repeater input frequency).
•
If
“
OFF
”
appears, con
fi
rm that the offset frequency (p. 21) is set
correctly.
t
Release [PTT] to receive.
y
Push [MONI(ANM)] to check whether the other station
’
s
transmit signal can be received directly.
u
To return to simplex operation, push [LOW(DUP)] for
1 sec., once or twice, to clear the
“–”
or
“
+
”
indicator.
i
To turn OFF the subaudible tone encoder, push [TONE(T-
SCAN)] several times until no tone indicators appear.
While transmitting
While receiving.
Appears
[TONE(T-SAN)]
Either
“–”
or
“
+
”
appears.
[LOW(DUP)]