Icom IC-V8000 Instruction Manual - Page 80
Data cloning - software
View all Icom IC-V8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
12 OTHER FUNCTIONS Data cloning AT POWER ON Cloning allows you to quickly and easily transfer the programmed contents from one transceiver to another; or , data from a personal computer to a transceiver using the optional CS-V8000 CLONING SOFTWARE. D Cloning between transceivers q Connect the OPC-474 cloning cable to the [SP] jack of the master and sub-transceivers. • The master transceiver is used to send data to the sub-transceiver. w While pushing [M/CALL(PRIO)], turn power ON to enter cloning mode (master trans- ceiver only- power on only While pushing [M/CALL(PRIO)], for sub-transceiver). turn power ON. • "CLONE" appears and the transceivers enter the clone standby condition. To [SP] jack OPC-474 (option) To [SP] jack Pushing [MW(S.MW)] to start cloning (master transceiver). e Push [MW(S.MW)] on the master transceiver. • "CL OUT" appears in the master transceiver's display and the S/RF indicator shows that data is being transferred to the sub-transceiver. • "CL IN" appears automatically in the sub-transceiver's display and the S/RF indicator shows that data is being received from the master transceiver. r When cloning is finished, turn power OFF, then ON to exit cloning mode. 69