Icom IC-V8000 Instruction Manual - Page 46

6 CALL CHANNEL OPERATION Call channel selection Push [M/CALL(PRIO)] several times to select the call channel. ➥ Push [M/CALL(PRIO)] several times to select the call channel. • "C" appears instead of memory channel number indication. • Push [M/CALL(PRIO)] once or twice to select memory mode, or push [V/MHz(SCAN)] to select VFO mode. Appears ➥ Push [MR/CALL] for 1 sec. to select the call MR/CALL channel. • Push [MR/CALL] to select memory mode, or push [VFO/LOCK] to select VFO mode. ✔INFORMATION When the VFO mode is selected from the call channel, a small "c" appears instead of memory channel number. Small "c" shows VFO was selected from the call channel. 35 Call channel transferring q Push [M/CALL(PRIO)] several times to select the call channel. • "C" appears. w Push [MW(S.MW)] momentarily, then rotate the tuning dial to select the memory channel to transfer the contents to. • "M" indicator and memory channel number blink. • To transfer to the VFO, push [MW(S.MW)] for 1 sec. e Push [MW(S.MW)] for 1 sec. to transfer when a momentary push was used in the previous step. • If channel names have been programmed into the call channel, the names are also transferred. z Push [MR/CALL] for 1 sec. to select the call MR/CALL channel. x Push [FUNC], [CLR A(MW)] momentarily, then push [Y]/[Z] to select the memory channel to MW transfer the contents to. • To transfer to the VFO, push [FUNC], then push [CLR A(MW)] for 1 sec. [Y]/[Z] c Push [FUNC], then [CLR A(MW)] for 1 sec. to transfer when a momentary push was used in the previous step. • If channel names have been programmed into the call channel, the names are also transferred.